Limited 1 year Warranty

K & H Manufacturing warrants to the original consumer, that this product will be free of defects and workmanship for a period of one year from the date of purchase. The manufacturer�s liability hereunder is limited to replacement of the product. This warranty is void if the product has been damaged by accident, unreasonable use, neglect, tampering, or other causes not arising from defects in material or workmanship.

To exercise your warranty: If, during the warranty period, your product malfunctions, return it to the place of purchase with your original purchase receipt. If this cannot be done, return the product, postage prepaid, to K & I-I Manufacturing, with dated proof of purchase or original dated receipt. All returns to manufacturer must be accompanied by a return authorization number, obtained by calling (719) 591-6950. Please include a note explaining the problem when returning the product.

 

Thank you for purchasing K & H Manufacturing�s THERMO-BED. When used correctly, your THERMO-BED should provide years of hassle free warmth for your pet.

Your THERMO-BED is intended for indoor use. Its unique heating system is designed to become warm, not hot.

WARNING: This is an electrical product. Read all directions and precautions carefully before operating. Failure to properly follow all directions and instructions may lead to electrical shock or fire which could cause serious bodily injury.

For household use Only

Important safeguards

When using electrical appliances, basic safety precautions should always be followed including the following:

1. Read all instructions.

2. To protect against electrical hazards, DO NOT immerse cord, plug, or appliance in water or other liquid.

3. Close supervision is necessary when used by or near children.

4. ALWAYS unplug from outlet when not in use.

5. DO NOT operate any electrical appliance with a damaged cord or plug, or if the appliance malfunctions or has been damaged in any manner. RETURN all malfunctioning appliances to the factory for examination.

6. DO NOT use appliance for other than its intended use.

7. DO NOT PUNCTURE HEATER FOR ANY REASON.

8. For use with 110-120 volt AC ONLY

9. CORD MUST EXIT towards the back of bed, away from normal travel of pet.

10. A liner must separate the pet bed warmer from the stuffing material.

11. SAVE THESE INSTRUCTIONS FOR YOUR USE.

Instructions for Use

1. Carefully position heating pad between outer and inner lining and close the opening so your pet cannot remove the heating pad. When to use, check the pad to ensure proper positioning.

2. Turn the bed so the cord is exiting the back of the bed, away from the normal path traveled by your pet.

3. When cleaning the bedding, unplug and remove the heater so you do not subject it to being immersed in liquids or cleaners.

4. Follow the above instructions when reassembling your THERMO-BED.

Testing your new THERMO-BED

After operating 1-2 hours, place your hands on your pet�s new THERMO-BED for 20-30 seconds, applying pressure. Sitting on your THERMO-BED is the best way to feel the radiant warmth your pet will enjoy. For the safety and enjoyment of your pet, THERMO-BEDS are designed to provide mild radiant warmth. THEY DO NOT GET HOT!