| |
Kalglo�
Electric Infrared Heaters |
HS Series
Basic Infrared heaters without any
controls built-in. These heaters will always be on with power is applied.
They can be controlled with an ON/OFF switch, or with a HTP-1 Portable
Heater Thermostat (see options at the bottom of this page).
These are the most common
heaters used for horse stalls or wash racks. The standard installation is to
install a switched outlet on the ceiling with either an on/off switch on the
wall (for stalls) or a Timer Switch that will automatically turn off the heater after a
preset time (for wash stalls, tack rooms, etc.).
|

HS-1208 |
Electric Infrared Heater.
Durable, metal-sheath Kalglo�
element.
800W, 120V, 6.7A, 35"
x 6" x
6", 7 lbs.
(KEC HS-1208) - $209.00
(Includes UPS Ground Shipping)
Price includes UPS Ground shipping to any location in the
contiguous USA.
Product will be shipped to you directly from the manufacturers
warehouse. |

HS-1215 |
Electric Infrared Heater.
Durable, metal-sheath Kalglo� element.
1500W, 120V, 12.5A, 65"
x 6" x
6", 11 lbs.
(KEC HS-1215) - $ 254.00
(Includes UPS Ground Shipping)
Price includes UPS Ground shipping to any location in the
contiguous USA.
Product will be shipped to you directly from the manufacturers
warehouse. |

HS-2408 |
Electric Infrared Heater.
Durable, metal-sheath Kalglo� element.
800W, 240V, 3.4A, 35"
x 6" x
6", 7 lbs.
(KEC HS-2408) - $209.00
(Includes UPS Ground Shipping)
Price includes UPS Ground shipping to any location in the
contiguous USA.
Product will be shipped to you directly from the manufacturers
warehouse. |

HS-2420 |
Electric Infrared Heater.
Durable, metal-sheath Kalglo� element.
2000W, 240V, 8.3A, 65"
x 6" x
6", 11 lbs.
(KEC HS-2420) - $269.00
(Includes UPS Ground Shipping)
Price includes UPS Ground shipping to any location in the
contiguous USA.
Product will be shipped to you directly from the manufacturers
warehouse. |
HS/RS Series
"RS" Models have built-in % power
regulators for manual control. Heater output may be manually set as follows:
OFF, 23-70%, or ON FULL. Changes in surrounding air temperature do not
affect output of heater.
|

HS-1208RS |
Electric Infrared Heater.
Durable, metal-sheath Kalglo� element.
Unit has built-in mechanical, manually adjusted, 0,23-67,100%, heat regulator.
800W,
120V, 3.4A, 35"
x 6" x
6", 8 lbs.
(KEC HS-1208RS) - $254.00
(Includes UPS Ground Shipping)
Price includes UPS Ground shipping to any location in the
contiguous USA.
Product will be shipped to you directly from the manufacturers
warehouse. |

HS-1215RS |
Electric Infrared Heater.
Durable, metal-sheath Kalglo� element.
Unit has built-in mechanical, manually adjusted, 0,23-67,100%, heat regulator.
1500W, 120V, 12.5A, 65"
x 6" x
6", 12 lbs.
(KEC HS-1215RS) - $299.00
(Includes UPS Ground Shipping)
Price includes UPS Ground shipping to any location in the
contiguous USA.
Product will be shipped to you directly from the manufacturers
warehouse. |

HS-2408RS |
Electric Infrared Heater.
Durable, metal-sheath Kalglo� element.
Unit has built-in mechanical, manually adjusted, 0,23-67,100%, heat regulator.
800W, 240V, 3.4A, 35"
x 6" x
6", 8 lbs.
(KEC HS-2408RS) - $254.00
(Includes UPS Ground Shipping)
Price includes UPS Ground shipping to any location in the
contiguous USA.
Product will be shipped to you directly from the manufacturers
warehouse. |

HS-2420RS |
Electric Infrared Heater.
Durable, metal-sheath Kalglo� element.
Unit has built-in mechanical, manually adjusted, 0,23-67,100%, heat regulator.
2000W, 240V, 8.3A, 65"
x 6" x
6", 12 lbs.
(KEC HS-2420RS) - $314.00
(Includes UPS Ground Shipping)
Price includes UPS Ground shipping to any location in the
contiguous USA.
Product will be shipped to you directly from the manufacturers
warehouse. |

Click on picture
for a larger view |
HTP-1 Portable Heater Thermostat
10� F -
100� F Range
Operates 1 - 120V Heater Only
Operation
1. Plug the thermostat into an outlet
of the proper voltage for the heating equipment.
2. Plug the heater cord into the
receptacle holes in the thermostat�s plug. If the heater has a built-in
on/off switch or heat regulator, be sure it is in the ON position.
3. With power on, turn thermostat knob
toward the �warmer� position (clockwise) or �cooler� position (counter
clockwise) until the heater goes on. Then adjust, as needed, to set air
temperature at which you want the heater on.
(KEC HTP-1) - $99.00
(Includes UPS Ground Shipping)
Price includes UPS Ground shipping to any location in the
contiguous USA.
Product will be shipped to you directly from the manufacturers
warehouse. |

Click on picture
for a larger view |
Kalglo�
Portable Heater Thermostat
10� F -
100� F Range
Operates 1 -
120V or 240V Heater
Operation
1. Per the diagram below, and observing
national and local electrical code requirements, wire thermostat in series
with the electrical circuit supplying the heater outlets. Be sure to
properly ground the thermostat enclosure and the receptacle.
2. If a power regulator is also wired
in the same circuit, wire the thermostat in series before the power
regulator.
3. With power on and all other on�off
switches in the �on� position, turn thermostat knob toward the �warmer�
position (clockwise) until the heater goes on. Then adjust, as needed, to
set the air temperature at which you want the heater to be on.
(KEC HTH-1) - $79.00
(Includes UPS Ground Shipping)
Price includes UPS Ground shipping to any location in the
contiguous USA.
Product will be shipped to you directly from the manufacturers
warehouse. |
|