Horse Stable Installation
For the best control we recommend placing one (1) spray nozzle assembly in the center of each 10' x 10' to 12' x 12' stall and one (1) spray nozzle assembly near each aisle way door.
Nozzle assemblies are not needed in feed areas, wash areas or tack rooms - excellent control is accomplished by installing nozzle assemblies in areas that house horses only.
Nozzle assemblies down the aisle way area are not needed but can be added per customer request.
Dairy & Cattle Barn Installation
Holding areas and loafing sheds provide a good
area for installation. Controlling insects in these areas provides a
more comfortable atmosphere for livestock. Comfort often leads to
increased production and higher yields.
One (1) spray nozzle assembly per 100 square feet with-in the
interior of a shed or barn and one (1) spray nozzle assembly every
10 feet over any open side walls.
Automist Nozzles and Fittings
Nickel plated nozzles and fittings offer superior protection from
corrosion. Simple, quick and easy are a few words that describe our
nozzle assemblies and fittings. Inter-changeable fittings can be used
on either of our nozzles - straight or 45 degree.
Tee nozzle assembles work well in most areas. This is the most
common choice for livestock applications, one tee nozzles per 12' x
12' stall or area.
Elbow nozzle assemblies are used at the end of a tubing run. This
nozzle is used on the end so that a air bleeder valve is not
necessary.
Straight nozzle assemblies are used in areas where a loop of tubing
may not be needed or available. Branching off of a main feed line to
supply a straight nozzle offers the flexibility to reach areas that
might be out of the way.
The fitting release tool makes changing fittings and nozzles in the
field a snap. If a nozzle becomes plugged over time simply pop the
adapter and nozzle out and pop a new one in. Simple as that.
Liquid Level Control
We protect our pumps by using a liquid level control. This control
senses when the liquid is low and disables the pump. Once the system
is filled the control senses it and enables the pump to be operable
once again.